Page 6 - Truth Patio Door Hardware

SIDE ADJUST
TANDEM ROLLERS

F
FIG.1APPLICATIONOF39SERIESPATIODOORROLLER

4.650
[118.1 mm] CASE .438 (11.1mm)MINIMUM
HOLE SIZE TO ACCESS
ADJUSTMENT SCREWS

1.116
[28.3 mm]

R.125
MOUNTING CARRIER [3.2 mm]
TABS WHEEL WHEEL RADIUS
5.752 .718
[146.1 mm] [18.2 mm]

1.116
[28.3 mm]
.660
[16.8 mm]
.183* .452 1.294*
(4.6mm) [11.5 mm] (32.8mm)
.493** 1.604**
(12.5mm) (40.7mm)
STANDARD MOUNTING TABS INVERTED MOUNTING TABS

.928
[23.6 mm]

.264
.371* [6.7 mm]
(9.4mm)
.681**
(17.3mm)
OFFSET MOUNTING TABS

*FULLY RETRACTED WHEEL POSITION-DIMENSION IS TO INSIDE WHEEL RADIUS
**FULLY EXTENDED WHEEL POSITION-DIMENSION IS TO INSIDE WHEEL RADIUS

PART CASE AND CARRIER WHEEL MOUNTING SPECIAL FEATURES
NO. MATERIAL MATERIAL TABS
39.10 STEEL STEEL STANDARD
39.11 STEEL NYLON STANDARD
39.13 STAINLESS STEEL STAINLESS STEEL STANDARD SST MOUNTING TABS
39.14 STEEL STEEL INVERTED
39.20 STEEL STAINLESS STEEL STANDARD
39.22 STEEL NYLON INVERTED
39.23 STEEL NYLON OFFSET
39.24 STEEL STEEL OFFSET
NOTE:
TRUTH PATIO DOOR ROLLERS ARE ADJUSTABLE FROM BOTH SIDES.
WHEN TURNED COUNTER-CLOCKWISE, THE SIDE WITH CROSSED SLOTS
RAISES THE DOOR. WHEN TURNED CLOCKWISE, THE SIDE WITH THE
SINGLE SLOT RAISES THE DOOR.
RECOMMENDED SCREWS:

(QTY 2)#8 PHILLIPS, FLAT HEAD SCREWS (LENGTH AND THREAD 1b
TYPE TO BE DETERMINED BY PROFILE)